News

Turnstile gate is a common entrance and exit control equipment, usually used in stations, shopping malls, office buildings and other places. It can effectively limit the flow of people and vehicles to ensure that only authorized people or vehicles can pass. To use a turnstile, you first need to place the turnstile where traffic needs to be controlled. Then, the opening and closing of the turnstile is controlled through a control device on the turnstile (usually a button or a card reader). When passage is required, users can open the turnstile by swiping their card or pressing a button, and then enter the target area through the turnstile. After the user has passed through, the turnstile will automatically close to ensure that only authorized personnel can enter. Some common turnstiles are: Tripod turnstile gate: A tripod turnstile gate is a common turnstile gate, usually composed of three mutually perpendicular rotating railings, which control traffic through the rotation of the rotating railings. It has simple structure and easy operation, and is suitable for places with dense traffic. Four-roller gate: The four-roller gate is similar to the tripod turnstile gate and is usually used in places with larger traffic volume and higher safety requirements. Half-height revolving door: The height is about 1.2 meters, which can effectively control traffic while ensuring traffic efficiency and safety. It is suitable for places where people pass frequently and the traffic flow requirements are not high. Full height turnstile: The height is higher, generally more than 2 meters, which can effectively prevent illegal entry and ensure traffic order. It is suitable for places that require strict traffic control and high safety requirements. Using a turnstile is not complicated. As long as you follow the correct methods and precautions, you can achieve good entrance and exit control.

Turnstile gate is an intelligent access control device that is widely used in various industries. It has the characteristics of easy use, high efficiency, safety and reliability. It has gradually replaced the traditional access control method and become an important part of the modern access control system. Commercial buildings: In commercial retail places such as shopping malls, supermarkets, convenience stores, etc., effectively control the flow of people and prevent unauthorized personnel from entering. Equipped with identity verification systems, such as fingerprint recognition, face recognition and other technologies, to ensure that only authorized personnel can enter, improving security. Public transportation: Swing turnstile gate is often used at the entrances and exits of transportation hubs such as subway stations, train stations, and airports to limit the number of people passing through each time and ensure that passengers can enter and exit the station in an orderly manner. Public buildings: widely used in office buildings, government agencies, hospitals and other places. It can not only play the role of access control, but also realize attendance management, visitor management and other functions. Ensure security and confidentiality. Educational institutions: such as schools, universities, etc. It can control the entry and exit of students, prevent outsiders from entering the school, and ensure the safety of students. Improved the safety of the living environment. Some common gates are: Full height turnstile, tripod turnstile gate, four-roller gate, wing turnstile gate, etc. It is easy to use, highly efficient, safe and reliable, providing powerful access control protection for various industries and bringing many conveniences and benefits.

Turnstile gate is a common device used to control fluid flow. It usually consists of door leaves, door shafts, transmission mechanisms, seals, driving devices and other parts. Its working principle is to change the size of the fluid channel by rotating the door leaf, thereby controlling the flow rate and flow rate of the fluid. The structure of swing turnstile gate mainly includes three parts: door leaf, door shaft and transmission mechanism. The door leaf is the most important component of the turnstile. It is usually made of metal or polymer materials and has good strength and wear resistance. The door shaft is the part that connects the door leaf to the transmission mechanism. It is made of metal material and can withstand the weight of the door leaf and the resistance of the fluid to the door leaf. The working principle of the rotary gate mainly relies on the rotation of the door leaf to change the size of the fluid channel. When the door leaf rotates to the fully open position, fluid can pass freely; when the door leaf rotates to the fully closed position, fluid cannot pass. During the rotation of the door leaf, the size of the gap will continue to change, thus affecting the flow rate and flow rate of the fluid. Turnstiles usually adopt a sealed structure to ensure their working effect. Common sealing structures include soft seals and metal seals. Soft seals are generally made of materials such as rubber or polyurethane. They have good sealing performance and are suitable for low-pressure or medium-low temperature fluid systems. Common turnstile models include the following: Ordinary turnstile: driven by a manual transmission mechanism, suitable for small and medium-sized fluid systems. Electric rotation gate: driven by an electric transmission mechanism, it can realize automatic control and is suitable for large fluid systems. Hydraulic rotary gate: driven by a hydraulic transmission mechanism, it can achieve large flow and high pressure control, and is suitable for high-demand fluid systems. Pneumatic rotary gate: driven by a pneumatic transmission mechanism, it has the characteristics of fast response and high reliability, and is suitable for systems with high fluid control requirements. Two-way rotary gate: It has the characteristics of two-way channel and can realize two-way control of fluid. The speed turnstile gates is a common device used to control fluid flow. The rotation of the door leaves changes the size of the fluid channel, thereby controlling the fluid flow rate and flow rate. It has the advantages of simple structure, convenient operation and high reliability, and is suitable for various fluid systems with different requirements.

With the continuous development of technology, facial recognition technology has been applied in more and more scenarios. For example, facial recognition access control gates are used by a certain petrochemical company to manage the entry and exit of employees. Five channel outdoor facial recognition access control gates are installed according to the needs of their own factory area. This is convenient and fast to use, and also has many performance advantages. So what are the characteristics of the five channel facial recognition access control gate application in petrochemical enterprises? 1. The facial recognition access control machine has strong customization and good applicability, and can be used both in office buildings and at the entrance of large industrial parks and factories. Just choose indoor and outdoor gates according to your needs. Customized according to actual needs in different factory areas, the number of gate channels is set at different entrances and exits, and different access permissions and attendance rules are set to facilitate flexible management by enterprise management personnel. 2. The face recognition access gate has high efficiency. Traditional access control systems require employees to swipe their cards or enter passwords one by one, which is relatively time-consuming to apply. The face recognition gate can accurately and quickly complete access control and attendance operations by scanning dynamic facial features of personnel, greatly improving the efficiency and accuracy of entry and exit, and facilitating data statistics for enterprise management personnel. 3. The application of outdoor facial recognition for access control in petrochemical enterprises has safety features. Because the dynamic facial features of personnel can be scanned, the identity information of employees can be quickly verified, ensuring that only authorized internal employees and off-site construction personnel can enter the factory area.

Nowadays, many automations have been carried out through the reform of Industry 4.0. With the development of the times, the production speed of products required by the market is no longer up to the requirements of most enterprises. Therefore, management models and hardware have been optimized and upgraded accordingly. Today, we will mainly learn about how the ESD anti-static management system in the workshop helps enterprises solve electrostatic problems and improve product quality requirements. The ESD anti-static management system can achieve real-time collection and transmission of ESD data, position personnel positioning, production environment and other intelligent manufacturing data and status of intelligent factories. It can be combined with the factory's production management system in real-time, using a display interface to display the data information that needs to be displayed, optimizing the factory management level and achieving lean production. 1. Introduction to ESD anti-static monitoring system According to statistics, the losses caused by static electricity in the electronic industry worldwide each year amount to hundreds of billions of dollars. With the development of the electronic industry, the precision of electronic products will become higher and higher, but the electrostatic sensitivity of electronic products will become lower and lower. ESD is also increasingly worthy of attention by enterprises. 2. The value of ESD anti-static monitoring system 1. Real time monitoring: Visual management, without the need for manual inspection, achieving fully automatic intelligent measurement, warning, and real-time notification of the location of monitoring points for poor grounding. 2. Product traceability: A complete event record. When a product is found to be defective due to ESD, the problem nodes and cause records of ESD accidents can be found by querying the data records of the relevant production lines. 3. Audible and visual alarm: The on-site LED display screen monitors the alarm in real time. In addition to the built-in buzzer alarm of the monitoring device, the workstation can also expand the LED alarm light. 4. Efficient management: It enables managers or employees to quickly identify the location of poor grounding, achieve accurate and rapid problem-solving, automatically generate complete data results and reports, and prevent human errors. 5. Quality improvement: Maintain the normal operation of anti-static equipment and production equipment anti-static system, effectively control product quality problems caused by static electricity, reduce production costs of the enterprise, and ensure the personal safety of operators. 3. ESD anti-static monitoring system composition - system architecture The ESD anti-static monitoring system utilizes a local area network to combine hardware and software to achieve a complete closed-loop. Through the combination of industrial gateways, display end LCD screens, anti-static gates, anti-static monitors, anti-static bracelets, ion fans, and other hardware, data is transmitted to the host, and after calculation by the host, it is transmitted to the LCD terminal for easy display on the display screen. At the same time, the data is also viewed in real-time in the management software

In recent years, with the development of society and the improvement of people's living standards, hospitals as an important place for medical care, safety management has received increasing attention. In order to improve the safety management level of hospitals, more and more hospitals are starting to use face brushing verification gates to ensure the safety and public order within the hospital. As a public place, a large number of people enter and leave the hospital every day, which poses a great challenge to the safety management of the hospital. Traditional access control systems are prone to human deception, and face recognition technology can effectively avoid this situation. Hospital face recognition access control machines can perform identity recognition by comparing facial features, ensuring the safety and security of hospitals. The face brushing verification gate can further improve the security of access control, and the gate can only be opened after the authentication is passed. In addition to safety, there are many other advantages to the hospital facial scrub verification gate. Firstly, it can improve the management efficiency of hospitals. Traditional access control systems require security personnel on duty, while face recognition technology can automatically complete identity verification, saving labor costs. Secondly, it can enhance the image of hospitals. With the continuous development of technology, people are paying more and more attention to the application of technology. The use of facial scrub verification gates in hospitals can reflect their modern and technological image. In the future, hospital face brushing verification gates will become increasingly popular and become the mainstream of hospital access control. In addition to improving safety and management efficiency, it can also bring more convenience and benefits to hospitals. As an advanced technology, the application of face brushing verification gates will continue to expand, bringing more innovation and development to the safety management and intelligent construction of hospitals.

In order to better enhance the experience of tourists in scenic spots, many scenic spots will intelligently upgrade the traditional manual ticket checking. Install an intelligent ticket checking access gate at the entrance of the scenic spot to enhance the ticket checking experience! What kind of experience does the intelligent ticket inspection gate bring to the scenic spot? Let's take a look together! 1. Professional QR code reader for fast identification The scenic spot ticket verification gate has an excellent experience in ticket checking, which is more intelligent and convenient than traditional manual ticket checking. The ticket inspection gate uses a professional QR code reader. Simply swipe the QR code electronic ticket placement identification area to accurately and quickly verify ticket information. And it can quickly identify whether in strong light, backlight, or dark environments, which not only helps scenic area managers solve the ticket checking problem during peak tourist hours, but also ensures the travel safety of tourists! 2. Opening the verification of the person's certificate to identify preferential tickets The entrance control gate for ticket verification in the scenic area has the function of person ID verification! Conventional ticketing verification equipment only has a single scanning function, but it cannot accurately identify the elderly, children, and other people who hold preferential tickets. Therefore, our company has introduced a ticketing inspection gate to perform ID card comparison for these people who have obtained preferential tickets. Tourists with regular tickets scan QR code electronic tickets for passage, and tourists with preferential tickets swipe their ID cards for ID card comparison for passage, effectively preventing the risk of theft of preferential tickets, Ensure the safety and revenue of ticketing. 3. Industrial grade quality, stable operation The entrance control gate for ticket verification in the scenic area adheres to the industrial grade and high-quality construction. Not only that, but also because of the strict requirements for products, they are not afraid of extreme cold and heat, and can operate stably for a long time in high and low temperature environments! Moreover, the ticket checking access control machine can simplify the ticket checking process, improve the travel efficiency of tourists, effectively improve the quality of service and the viewing experience of tourists, and well solve the ticket checking problem during peak periods in scenic spots.

Face recognition technology is becoming more and more mature. Face recognition gate system is widely used in various fields of security management measures. It has the advantages of timeliness, simplicity and low cost. The face recognition gate control system is mainly composed of a camera, a programmable controller and a gate. The face image is collected by the camera, and the programmable controller performs real-time analysis and processing, and controls the gate switch according to the comparative analysis results. The contactless IC card has high security performance and has the functions of identity verification, real-name authentication, and remote control of photo information registration. First of all, the face recognition gate control system has a fast response speed. After collecting the face recognition information, it can quickly analyze, process and compare the analysis, and complete the identity verification in a short time. Timeliness can also prevent unauthorized personnel from entering. Secondly, the system is easy to operate. Just register the face recognition data into the system, the system can quickly verify the face recognition data, and automatically control the switch of the gate, without the need for operators to join, saving labor costs. In addition, the system can also carry out remote control, monitor the working status of the system gate in real time, and view the list of people passing through. The entrance and exit control of the face recognition gate control system plays an important role in improving the security of the enterprise. It has the advantages of fast timeliness, simple use and low cost. It also has the functions of identity verification, real-name authentication, photo registration and remote control, which can effectively prevent unauthorized personnel from entering and provide security protection for users. In daily life, more and more office buildings, factories, airports, schools and other places have begun to use face recognition gate, especially the application of commonly used face recognition swing gate and face recognition wing gate. Intelligent gate is constantly changing according to demand, which can effectively reduce the workload of security personnel and greatly improve the safety performance. It can quickly and accurately recognize the face image captured by the camera, so as to effectively resist possible threats. Through intelligent recognition technology, the security intelligent camera can recognize faces, behaviors and objects in real time, and analyze the recognition results to help realize security management and intelligent applications. It can also collect relevant passenger flow data, provide important decision-making basis for application scenarios, and improve operational efficiency. The application of face recognition swing brake can effectively save management costs and improve safety performance, which is an important technical means in the current management industry. Its emergence not only provides a more effective safety management measure for the industry, but also provides consumers with more convenient access management services, so that consumers have a more safe and reliable feeling.

In the production management of enterprises, especially industrial manufacturing enterprises, it is a common sense to take anti-static measures. Now there are many anti-static bracelets, anti-static wristbands and other products on the market. However, the enterprise has equipped workers with anti-static equipment, how to ensure that workers wear it correctly? In the actual industrial production environment, many employees do not know enough about static electricity and the harm it causes, so they are often unwilling to wear anti-static products for the sake of convenience. On the one hand, enterprises should take anti-static measures, and on the other hand, they must monitor whether anti-static measures are in place. Only in this way can the anti-static safety measures be truly implemented, so as to avoid the occurrence of electrostatic production accidents. ESD anti-static access control system is composed of software server, ESD anti-static switch, switch and monitoring board. ESD anti-static gate (multiple options) collects data information and sends it to the server. The server displays the data output on the monitoring board of ESD anti-static gate system through the switch. The data is clear and intuitive. The ESD anti-static access control system integrates the access control system, the static monitoring system and the personnel management system. In addition to the most important function of real-time monitoring the static situation of employees in the enterprise, abnormal prohibition and timely alarm, there are also the attendance recording function and personnel authority setting function. ESD anti-static access control system is an integrated solution of software and hardware. It can not only record personnel access data, but also set different detection items according to permissions. We can set permissions in the software background, and set different detection items according to the operators of different positions, so that people who do not need electrostatic detection can quickly pass through the gate, effectively improving work efficiency. ESD anti-static access control system can not only monitor the electrostatic situation of enterprises, but also manage the personnel of enterprises. Through the management of personnel's attendance, ID card, work permit and other information, the safety of enterprise personnel can be ensured and electrostatic accidents can be avoided.

The intelligent information terminal for face visitors, attendance, and conference sign-in is also called face recognition access control, attendance, visitor, and conference sign-in touch all-in-one machine. Double-headed camera can be used to realize close and remote recognition, face and ID card recognition, face recognition above 10000, attendance records and visitor records can be stored for 100000+, Android system and touch control. It can effectively complete the work of internal staff's fast clocking and attendance and external staff's fast registration, improve the level of use scenarios, and complete personnel management in a more scientific and intelligent way, saving cost support to a certain extent. Application scenarios: enterprises, exhibition halls, schools, hotels, financial institutions, etc. Features: 1. It can be connected to the access controller or access gate to realize access control and visitor management Accurate and fast dynamic living face recognition, 2. It supports the ID card verification function, and can enable the combination of ID card verification function; 3. It has the function of printing identity certificate visitor list and supports the use of stickers to identify identity; 4. Support advertising playback (you can customize the playback types of advertising images, videos, etc.) 5. Background data visualization management, module data intercommunication and sharing, support mobile APP management; 6. Integrate visitors, access control, attendance, meetings and advertising to support third-party docking A complete set of instructions for the installation of face recognition access control and attendance gate The intelligent recognition system of face recognition turnstile has been continuously applied in many domestic scenes, such as the access control management of face recognition turnstile launched by Beijing Tongzhou Sub-center; A new face recognition swing gate on an office building in Jiangsu is used for attendance management. Face scanning, ID verification, check-in and clocking, access control management, face payment... The face recognition gate seems to be gradually closely related to the life of the public. 1. Face recognition gate type The commonly used gate types include three-roller gate, swing gate, wing gate, translation gate, full-height and half-height rotary gate, which can be configured with face recognition system and hardware products for use in multiple scenarios such as residential areas, schools, courts, office buildings, etc. 2. Face recognition composition Face recognition gate terminal and gate volume are mostly composed. In addition to instant code brushing and verification code opening, the face recognition gateway with good service can also do face recognition (face brushing) opening, which not only improves the comfort of entering and leaving, but also enhances the safety factor. 3. Installation 1. Site survey: determine the location of the gate at the entrance and exit, measure the length and width of the gate, judge whether the gate host and slave can open the swing door, the longer the control board contains the digital tube is the host, the shorter the control board is the slave, or check the gate label. 2. Entrance test Open the cabinet door, remove the air switch, connect the 220V power supply line, open the side panel of the host and slave, and plug the online network cable, wiring terminal and five-core communication cable of the host and slave. The power-on test performance of the master and slave baffles swings in turn, and the final closing and power-on are normal. Place the face recognition gate in parallel to ensure the same distance on both sides, and the recommended distance is 75CM. 3. Slotted wiring Generally, the project site can choose whether to slot and embed the line according to the actual situation. 4. Equipment installation Install the access control and attendance integrated machine and support required by the project, twist the top of the support to remove and wash the support, rotate the nut at the bottom of the support to fix it with the gate machine, and the line passes through the inside of the support, fix the bracket hanging plate and the rear plate of the face recognition access control integrated machine, and then connect it with the gate machine line. Tighten the bracket top cover to secure the device. Install the card reader, open the top plate of the swing gate, press the side of the card reader with LED light close to the punch position, and fix it. Connect the line at the bottom of the card reader and cover the upper cover of the gate. 5. Equipment commissioning After installation, start the face recognition gate, select the stand-alone management and enter the password, long press the face recognition terminal screen, select the set password ID card, and enter the password to conduct personnel management. Add a person, enter the relevant information of the person, select the face verification and enter the face, select "card" for the verification information, set the card type to be entered, put the IC card close to the access control face recognition machine, and then automatically enter the card information. IC card number and authority can also be entered through external card reader. Enter the password corresponding to the job number to complete the configuration. After setting up the face recognition all-in-one machine, debug the main control gate, select the mode at the bottom to change the gate access rules, here set the exit as infrared authentication, and the personnel do not need authentication when going out. Then select different voice broadcast functions according to the requirements. Other functions can be set and tested one by one according to the instructions 6. Gate system management The background system can add all face recognition access control and attendance all-in-one machines in a centralized way, and conduct group management. Personnel information can be imported in large quantities, and attendance methods can be added as required, which is applicable to large-scale attendance and access control requirements. 7. Verify delivery Face ID card is required for the entrance and exit of the gate. People can quickly recognize the face when they are close to the gate channel to realize the senseless passage. The card reader can also read the ID card, and the person can swipe the card in and out through the face recognition all-in-one machine. Free choice of multiple modes of access. 2. It is applied in different ways and modes in different scenarios: station, office building, factory, park, construction site, amusement park, park, campus, community, library, etc.

Advantages of intelligent pedestrian passage gate equipment 1. The card reading part can be equipped according to the requirements, and the time delay or infrared sensor can be reset automatically. 2. It has the functions of witness comparison and face recognition, and greatly improves the security and traffic power. 3. With the function of counting, the external screen flashes the flow of people, which is convenient for the owner to handle. 4. The channel gate can work with the host network or offline. According to the parameters downloaded in advance, intelligently verify whether the pass identity is useful, authorize the pass, and record the pass information. 5. With communication interface, it can directly control the operation of channel gate equipment through software, which is convenient for centralized and unified processing and control of large channel system. In recent years, with the increasing application of face recognition systems, many office buildings, railway stations and other crowded places have adopted face recognition and comparison gateways. The face recognition channel gateways can not only quickly identify and compare people in and out, but also effectively improve the safety and traffic efficiency of the places. Use of intelligent pedestrian passage gate 1. The intelligent pedestrian passage gate equipment organically integrates the mechanical, electronic, microprocessor control and various identification technologies to facilitate the use of card reading and identification equipment such as IC card, ID card, barcode card and fingerprint. It coordinates the intelligent control and management of the passage gate through the selection of various identification system equipment and the use of reliable security protection devices, alarm devices, direction indicators, etc. 2. The smart channel gate management system uses smart card identity authentication technology, computer network management technology and security protection technology to control the access of equipment management personnel through the smart channel, and establishes a reasonable security authentication, orderly access, and efficient statistical management system. 3. The application field of intelligent pedestrian passage gate is very wide. It can be said that the passage products can be used wherever there is a need to control the flow of people in and out. From the field of use, it is mainly divided into traffic fare collection, exhibition hall fare collection, tourist attraction fare collection, entertainment venue fare collection and access control channel management system and other occasions

Barrier free ESD anti-static gate refers to barrier free channel gate cooperating with ESD static tester 1. The static test is passed, and the barrier free gate will not send out abnormal prompt sound or alarm when employees pass the barrier free channel, 2. If the static test fails, the barrier free gate will give an abnormal tone or alarm when the employee passes the barrier free passage 3. Without testing electrostatic items, the barrier free gate will give an abnormal tone or alarm when employees pass through the barrier free channel Wall mounted ESD access control system refers to the ESD access control fixed on the wall. Generally, the gate is not installed. The electrostatic tester and electrostatic software are the same as the gate. Select an appropriate ESD anti-static access control scheme according to the installation location and price budget.

In recent years, with the continuous development of the city, the management of people's passage in public places has become an effective solution to solve public safety and the flow of people. Especially after the outbreak of the COVID-19, the ability and requirements for the access management of people in public places have also been constantly improved. The security functions such as face recognition, mask access, and sensorless temperature measurement have become the core needs of all places while quickly recording and managing the access information of people. An entrance and exit personnel access management system is mainly composed of a management control system, visitor management equipment, channel equipment, permission reading equipment, etc. It provides multiple access methods such as face recognition, card swiping, ID card swiping, QR code swiping, password, etc., and then adds other functions according to the customer's actual scene requirements, such as epidemic prevention requirements non sensing temperature measurement+mask anti-counterfeiting, security requirements permission management. Among them, there are many software and hardware products involved, and the market brands are complex. How to select a suitable personnel access management system is difficult to see! ·First, clear the use site and traffic scene Scenic spots, hospitals, schools, venues and other places have high safety for personnel passing, focus on preventing personnel from tailgating, associate ticket sales and check, and meet the requirements for mixed flow of non motor vehicles and personnel. Places such as communities, parks, office buildings and government agencies have high requirements for access rights, can distinguish between internal and external personnel, have both unattended and visitor management functions, and have special requirements for product appearance, appearance, etc. Stations, wharves, airports, high-speed railway stations and other places with larger passenger flow and relatively complex personnel in public transport hubs have higher requirements for impact resistance, service life, personnel information records, personnel speed, etc. in addition to safety and comprehensive functions. ·Secondly, the function demand assessment can make a simple preliminary judgment on the demand through the following common questions, and at the same time, further understand the product installation environment and site: ① whether the installation site is indoor or outdoor; ② whether there is mixed traffic of non motor vehicles and personnel; ③ whether the power connection and wiring are convenient; ④ whether there is a need for non inductive temperature measurement, mask anti-counterfeiting Health code verification and other epidemic prevention requirements ⑤ Requirements for access authority (internal special authority, visitor management) ⑥ Whether the site is managed by personnel

In the office field, face recognition attendance is becoming more and more popular. Compared with traditional clock in attendance, face recognition attendance has more prominent advantages. 1. Strong anti cheating ability: provide online and offline live detection schemes to effectively resist live cheating means such as video, remake and 3D model. 2. High attendance efficiency, time saving, and support multiple people to check in at the same time.3. Fast response: 200 ms fast identification and comparison, complete the whole process of face capture and attendance in 1 second 4. Automatic statistics, which supports user-defined statistics settings, such as late list, early leave list, attendance ranking list, etc. Face love cloud platform, intelligent office+face recognition application can provide you with: 1. Multiple attendance methods: face based attendance machine, access control all-in-one machine (face) 2. Intelligent shift scheduling analysis: support automatic recognition of scheduled, irregular and intelligent shifts 3. Business linkage: linkage with access control system to realize non inductive attendance 4. Real time information push of attendance message: enterprise WeChat real-time push of attendance management result message 5. Analysis of intelligent research results: intelligent technical analysis of attendance results supports user-defined result reports. 6. Face recognition hardware products: attendance machine, access control machine, channel gate, etc There are three main forms of application: Mobile attendance: the enterprise cloud office installation can realize multi terminal attendance, and employees can punch in anytime and anywhere without waiting in line. At the same time, it provides offline live detection, which can customize detection actions, and can effectively resist live cheating means such as video, color photos, 3D models, etc. Camera non inductive attendance: network camera or face capture camera, installed in the only way for students and staff to get in and out, can easily realize non inductive attendance. Because users do not need to sign in actively, the queuing process is reduced; In addition, the camera can capture multiple faces at the same time to achieve simultaneous attendance, significantly improving the efficiency of attendance. All in one machine attendance: camera and face comparison SDK are integrated into all-in-one machine attendance. Students and employees can quickly complete the attendance check by brushing their faces at the front desk, which can effectively prevent cheating behaviors such as substitute examination.

With the continuous development of the tourism industry in major scenic spots, one of the more obvious changes is the significant increase in passenger flow. On the one hand, it brings about the improvement of the economic benefits of the scenic spot, but it also exposes the shortcomings of the traditional ticketing system in the scenic spot, and the efficiency of ticket sales and ticket inspection is low. At present, the electronic ticket system has been launched in the scenic area, and the scenic gates used together with it can improve the work efficiency of the scenic area and maintain the orderly order of the scenic area. Three common types of scenic turnstiles are described below. 1. Sankun Gate As the name suggests, Sankun Gate is mainly composed of three rods. Its distinctive feature is the narrow gap between the gate rods. Only one person is allowed to pass through at the same time. Therefore, the speed of traffic is average, which is convenient for orderly control of one-way or two-way flow of people. At present, Sankun Gate has many different configurations and various identification systems, such as barcode identification. Based on this feature, the ticket inspection system at the entrance of the scenic spot generally adopts the scenic spot gate of Sankun Gate. 2. Wing gate Secondly, the wing gate is also a relatively common type of gate in the scenic area. Its basic composition is mainly two wings. Compared with the Sankun gate, its passage is wider and the traffic speed is relatively increased. The wing gate has the characteristics of sensitive recognition and fast gate opening, and can also cooperate with electronic tickets to realize offline ticket inspection management. Therefore, this type of gates in the scenic area greatly reduces the workload of the staff in the scenic area. 3. Swing gate Among the various types of gates in scenic spots, the type with a wider range of passages is the swing gate. The significant advantage of the swing gate is that the length of its swing arm can be customized for production, and it is also suitable for one-way or two-way control of people flow. Considering that the swing gate has a wide passage, it can be used as an access passage for bicycles and handicapped vehicles in the scenic spot. In general, the common types of gates in scenic spots are called Sankun gates, wing gates, and swing gates. These three gates have their own advantages and can meet the needs of scenic spot ticket inspection and scenic entrance crowd management. In addition, the scenic gate also includes the type of translation gate, which has high-end style, more stable performance, lower noise and fast running speed, so it is very popular in high-end scenic spots.

First, it is necessary to judge whether the shoes are anti-static shoes and whether the resistance is within the standard range: anti-static shoes are made of anti-static materials added to the soles. Anti-static shoes have a weak conductive function, which can remove excess electric charge from the human body. Lead to the ground to avoid electrostatic discharge from accumulating charges, thereby eliminating static electricity from the human body. Anti-static shoe resistance should be between 100K ohms to 1000M ohms. Second, it is necessary to confirm whether the resistance range of the tester of the anti-static gate is within the national standard range. Generally, the workshop settings: electrostatic shoes + human body: 500 kohms --> 100 megohms Third, it is necessary to check whether the ground wire is connected well? Is it false? Is it live? If it is not easy to judge, you can directly clip the ground wire of the electrostatic meter to the back of the upper cover of the anti-static gate, install the stud of the electrostatic meter (4 studs, just clip one), and then see if you stand on the ground, whether Passable: If this cannot pass, it is a problem with the ground wire. Fourth, check the pedals, whether the surface is contaminated (damp, dust, or cleaned with chemical cleaners)

In particular, the flow of people is difficult to manage. There are many entrances and exits of different manufacturers, and they face different problems. Functional gates can be solved according to each problem. The statistics of tourist traffic is even more difficult. With face recognition Ticket gates, the scenic spot can count the number of tourists in the scenic spot in real time, and achieve accurate management of tourist flow. The number of tourists counted through the gate is transmitted to the background command center, and the corresponding management plan can be activated according to the real-time number of people For example, when there are too many people, emergency plans can be activated, tourists can be evacuated from the scenic spot, and tourists can be guided to visit scattered places and visit places with few people. Building entrance and exit gates help to improve the image of enterprises and institutions, and also help to improve the passing experience of people The continuous improvement of the comprehensive construction level of intelligent campus is an important link in the safety management of school guards. Whether it is institutions of higher learning, kindergartens or primary schools, people attach great importance to school education, and safety management is getting more and more attention. Therefore, further improvement is needed in preventing outsiders from entering, so the entrance and exit gates will play a big role. The hospital uses the gate temperature measurement channel gate for access management, which can avoid close contact between people At the same time, the epidemic is not over yet, and each scene still needs to pay special attention to epidemic prevention and control It can also control the number of people in certain scenarios, so as to avoid excessive crowding and unnecessary hidden dangers. Zecheng Intelligent focuses on intelligent access control system equipment for multi-scenario applications. For the application requirements of product security, stability, integration and scalability in this field, Ketuo access control management system solutions can meet the application requirements of different formats.

The application of face recognition attendance machine on campus, I hope it will be helpful to everyone. The application of face recognition attendance machine in campus 1. Preface With the rapid development of my country's economy and the deepening of educational reforms, people's ideas have also undergone profound changes. The concept of "people-oriented" has been deeply rooted in the hearts of the people; With the popularization of application, the human resource management system based on computer network has become an important tool and means of school management. The traditional punch card model can no longer meet the needs of today's society. Therefore, how to improve the school's teaching efficiency, improve the school's management methods and improve the overall quality of students has become an urgent problem to be solved. Second, the current situation of face recognition technology in colleges and universities At present, domestic colleges and universities generally use the traditional manual punch-in mode for daily management. This management mode has many disadvantages: first, the workload of teachers and students is relatively large; second, due to The error rate of manual punching is relatively high (especially for some older teachers), so many teachers are reluctant to use this management mode to check attendance; third, if there is a phenomenon of missing or less punching, it is easy to cause Disputes between teachers and students; fourth, when emergencies occur, the relevant responsible persons cannot be notified in time, etc., which are the disadvantages of the traditional punch-in model. 3. Application of face recognition system in school management In order to solve the above problems in the current situation, a new technology must be introduced - biometric identity authentication technology (referred to as biometric identity authentication). It is a general term for a method and technical system that uses the inherent physiological characteristics of the human body as an identifier for personal identification, mainly including devices or instruments such as fingerprint collectors, palmprinters, and retinal scanners.

What type of speed gates (gates) are installed in schools is also selected according to the type of school and the actual situation of the installation site. Different types of schools such as kindergartens, primary and secondary schools, and colleges use different speed gates (gates). How to choose speed gates (gates) for different types of schools and installation sites? Mendao Baifenbai recommends some practical solutions for the reference of users and friends in need. 1. Selection scheme of kindergarten express gate (gate): Kindergarten children are relatively small, so they can choose a small swing gate in the speed gate (gate), and use the face recognition verification method to cooperate with this small swing gate. The swing gate has fast traffic speed, good anti-pinch performance, and high safety when children pass through. And face recognition can realize that after parents pass face recognition, content such as parent's name, parent's registration photo, child's photo, etc. will appear, so that kindergarten security personnel can intuitively verify whether the pick-up and drop-off personnel are effective, so as to ensure the safety of children's pick-up and drop-off, not to bad people. Take the opportunity. 2. Selection scheme of high-speed gates (gates) in primary and secondary schools: The school entrances of primary and secondary schools are generally open-air or semi-open-air environments, which are inevitably exposed to the sun and rain. The requirements for dustproof, waterproof, and sunscreen grades for express gates (gates) are relatively high. You can choose the wing gate or the three-roller gate in the speed gate (gate). Note that the wing gate or the three-roller gate here should be an outdoor model, and the indoor model cannot be directly installed outdoors. Wing gates and three-roller gates have relatively good waterproof and sun protection properties, and can meet the requirements of outdoor installation and use. In addition, the traffic speed of the wing gate and the three-roller gate is relatively fast. After statistics, about 30-35 people can pass through in one minute. There are many primary and secondary school students who will not cause congestion during the rush hour, and they have an anti-trailing function. Authorization is only allowed to pass through one person, and outsiders do not have permission to enter the school. It is difficult to follow students to enter. This improves the security of the school, and it can also connect to the smart campus system to understand the students' school status in real time. 3. Selection scheme of high-speed gates (gates) in colleges and universities: High schools, universities and other colleges and universities should choose the speed gate (gate) according to the actual situation of the installation site. If it is the gate of the school, the swing gate in the speed gate (gate) can be used. Note that the swing gate here should be outdoor, not Install the indoor version directly outdoors. The swing gate has the functions of waterproof, sun protection and anti-collision. During the peak period of students going to and from school, the flow of people is large, and there are many cases of students riding bicycles. Condition. It is suitable for bicycles to pass through, even if a student accidentally bumps into the swing gate, the swing gate has an anti-collision function and is highly resistant to damage, and will not be damaged by small bumps. For dormitories, libraries, canteens and other places, you can choose the wing gates in the express gates (gates). The wing gates are beautiful and the opening speed is fast. It can improve the grade of dormitories, libraries, canteens and other places while managing it in an orderly manner. Get in and out to avoid traffic jams.

Gate rental, gate rental, and face recognition machine rental services are temporarily used for ticket checking at the entrance of on-site events such as exhibitions, concerts, hotels, conferences, forums, etc. Now tell me what is a rental gate and a rental face recognition machine? 1. Scenario application: This kind of on-site event generally requires a ticket to enter the venue. The turnstile can choose three-roller turnstile, wing turnstile, swing turnstile, etc. as required. The ticket verification method includes card or face recognition, which depends on the activity. The organizer asks which method to choose 2. Hardware configuration: Generally, it is the gate plus card swiping, gate plus face recognition, as long as the gate, etc. This needs to be determined according to the approximate traffic statistics to determine how many channel gates to configure. Among them, only the gates are generally used. The function is to queue up, or the exit place only goes out and cannot enter 3. Software: swiping the card needs to enter the card into the gate system in advance; face recognition generally needs to be connected to the software, which is based on customer needs 4. Installation: It is generally necessary for the gate equipment company to come to the site in advance for debugging, and stay at the event site to watch until the end of the event 5. The price is convenient: the rental price of the gate and face machine is lower than the purchase price, and it can be withdrawn after renting without taking up space